RAM Installation
Installing RAM is one of the easiest steps in this process.
Firstly, make sure your RAM is the correct speed and type supported by your motherboard. Inspect the RAM modules, and you will notice the pins on the bottom of the module. One side should have more pins than the other, allowing the RAM to only fit in one fashion into the motherboard.
Find the memory banks on your motherboard, there should be two small levers on each side of the banks. Push down the these levers, then line up the RAM module in the proper fashion. Firmly push down the module, and the levers should automatically snap into place. If the RAM module does not seem to push down, chances are you have it lined up backwards.
RAM installation of fairly easy. So now that you are done with the RAM, let’s move onto the Hard Drive Installation.